View SSL40C-7618J_4316236.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SSL40C Series
EXTERNAL AC/DC POWER SUPPLIES * * * * * * *
S i n g l e O u t p u t E x t e r n a l Pow e r S u p p l y
40 W External AC/DC Power Supplies 1 4.65 x 2.40 x 1.08 inch enclosure 40 W continuous external power supply Molded UL94V-0 plastic enclosure Overvoltage and short circuit protection EN55022, FCC conducted and radiated emissions level B UL, CSA, VDE and CE safety approvals Available RoHS compliant
The SSL40C series is a 40 W universal input ac-dc external Class II power supply in a 4.65 x 2.40 x 1.08 inch plastic enclosure. The SSL40C represents the next generation of low cost external power supplies, suitable for a host of worldwide low power external power applications. The SSL40C provides up to 40 W under natural convection cooling. Standard features include universal ac input, overvoltage and short circuit protection and meets EN55022 level B for conducted emissions. The SSL40C has several output voltages available ranging from 12 V to 48 V. The series has full international safety approvals and carries the CE mark to provide pre-approved SELV outputs.
2 YEAR WARRANTY All specifications are typical at nominal input, full load at 25 C unless otherwise stated
SPECIFICATIONS
OUTPUT SPECIFICATIONS Total regulation Main output Line, load and temperature coefficient Less than 10 ms Main output, 70% to 100% full load step Auto-recovery 5.0%
GENERAL SPECIFICATIONS Hold-up time Efficiency 10% 5.0% of nominal voltage 140% nominal Continuous with auto-recovery 0A Isolation voltage Switching frequency Approvals and standards (See Note 4) Case material Flammability rating Weight MTBF MIL-HDBK-217F @ 25 C 115 Vac @ full load 115 Vac @ full load Input/output Fixed 10 ms 80% typ. 3000 Vac 72 kHz, typ. EN60950, IEC950, UL1950 CSA C22.2 No. 950 General Electric Lexan, black UL94V-0 200 g (7 oz) >150,000 hours
Overshoot/undershoot Transient response
Overvoltage protection (See Note 5) Short circuit protection Minimum output current INPUT SPECIFICATIONS Input voltage range Input frequency range Input current
ENVIRONMENTAL SPECIFICATIONS Universal input 90-264 Vac 47-63 Hz 90 Vac 264 Vac 1.0 Arms max. 0.6 Arms max. Relative humidity Level B Level B Altitude Vibration (See Note 6) Operating Non-operating 5-500 Hz per MIL-STD-810E Thermal performance Operating, full load 0 C to +40 C Non-operating -10 C to +85 C 0 C to +40 C ambient, Full load convection cooled 5% to 95% RH 10,000 feet max. 30,000 feet max. 2.4 G (approx.) 516.4 Part IV
EMC CHARACTERISTICS Radiated emissions Conducted emissions EN55022, FCC EN55022, FCC
International Safety Standard Approvals
geprufte Sicherhelt
Shock
VDE0805/EN60950/IEC950 File No. 133084G UL1950 File No. E136005 CSA C22.2 No. 950 File No. LR41062
File Name: ssl40c.pdf Rev (03): 07 Nov 2005
SSL40C Series
EXTERNAL AC/DC POWER SUPPLIES
OUTPUT VOLTAGE +12 V +15 V +18 V +24 V +48 V Notes
1 2 3
S i n g l e O u t p u t E x t e r n a l Pow e r S u p p l y
40 W External AC/DC Power Supplies 2
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
OUTPUT CURRENTS RIPPLE MIN 0A 0A 0A 0A 0A MAX 3.00 A 2.66 A 2.22 A 1.66 A 0.83 A PEAK
(1) (2)
TOTAL REGULATION 120 mV 150 mV 180 mV 240 mV 300 mV 11.4-12.6 V 14.25-15.75 V 17.1-18.9 V 22.8-25.2 V 45.6-50.4 V
(3)
OVP (MAX) 16.8 V 21 V 25.2 V 33.6 V 64 V
MODEL NUMBER
(7,8)
3.6 A 3.0 A 2.6 A 1.9 A 1.0 A
SSL40C-7612J SSL40C-7615J SSL40C-7618J SSL40C-7624J SSL40C-7617J
4
5
Peak output current lasting less than 3 seconds and non repetitive. During peak loading output voltage may exceed total regulation limits. 20 MHz bandwidth, peak to peak, measured using 0.1 F ceramic capacitor in parallel with a 10 F tantalum capacitor at the point of output load. Total regulation is defined as the static output regulation at 25 C, including initial tolerance, line voltage within stated limits, load currents within stated limits, and output voltages adjusted to their factory settings. To help maintain the power supply safety approvals, the IEC320/C7 input connector cable must be rated minimum 3 A and approved by an applicable safety agency for the intended country of use. National and international variations on mains plugs, adapters and customer preference to lead length prevents Artesyn from supplying an IEC320/C7 (or compatible) input connector cable. The IEC320/C7 input (or compatible) connector cable can be sourced locally, e.g. Newark, Qual Electronics, Radio Shack, etc. or other non affiliated distributors. This feature protects output circuitry from output overvoltage caused by internal PSU failure.
6 7
8
Three orthogonal axes random vibration, 10 minute test for each axis. The `J' suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative.
SINGLE OUTPUT PIN CONNECTIONS 2.5 MM JACK PLUG Inner Outer IEC 320 VA Return Two pins C8 type SWITCHCRAFT Power Jack, P/N 712A or equiv. INPUT CONNECTOR Rated at 2.5 A, 250 Vac
4.646 0.02 [118.0 0.5]
1.083 +0.024 -0.000 27.5 +0.6 -0.0 2.402 0.02 [61.0 0.5]
Cable Length 36.00 0.79 [914.0 20]
0.098 [2.50] 2.5 mm Phone Jack All Dimensions in inches [mm]
Datasheet (c) Artesyn Technologies(R) 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
www.artesyn.com
File Name: ssl40c.pdf Rev (03): 07 Nov 2005

▲Up To Search▲

Price & Availability of SSL40C-7618J

	To Download SSL40C-7618J Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .